Serving Aurora, CO & nearby Open 7 days · Mon–Fri 7AM–8PM Licensed & insured · 90-day warranty (844) 442-1999
Call for an upfront quote(844) 442-1999
Serving Aurora, CO

Mini-Split/Ductless AC Repair in Aurora, CO

Our technicians fix mini-split/ductless ACs in Aurora, CO. Every visit follows the same steps: listen to what happened, test the parts that can cause it, quote the repair upfront and test the unit before we leave.

Call (844) 442-1999 Book online
  • Upfront quote before work
  • 90-day parts & labor warranty
  • Parts matched to your model
  • Same-day service when available

Request service

Tell us what's wrong. We'll call you back to schedule.

We only use your details to arrange the repair. No spam.

or call now
(844) 442-1999
Licensed & insuredFully insured technicians
90-day warrantyOn parts and labor
Upfront pricingApprove the price first
248 appliance types426 brands serviced
Overview

How we repair your Mini-Split/Ductless AC

A ductless mini-split air conditioner pairs an outdoor inverter compressor with one or more wall, ceiling or floor heads that cool individual rooms without ductwork. A mini-split/ductless AC typically includes a compressor, condenser and evaporator coils, fans, a capacitor and contactor, and a thermostat, or a water pump and pads on evaporative coolers. A technician checks airflow, electrical parts and refrigerant pressures, and inspects drains and coils.

Mini-Split/Ductless AC repair at a glance

  • Typical repair cost$150–$600
  • Typical service life10–15 years
  • Warranty on repairs90 days parts & labor
  • QuoteUpfront, before work
  • Same-day visitsWhen available
Call (844) 442-1999
Diagnosis

Common Mini-Split/Ductless AC problems we fix

What usually causes each symptom, and what our technician checks to confirm it.

Indoor head blinking an error code

Likely causes
A communication fault between the indoor and outdoor boards, a failed temperature sensor, or a fault reported by the inverter board.
What our technician checks
The technician reads the fault code history, checks the interconnect wiring for voltage and continuity, and tests thermistors against their resistance charts.

Room not cooling but head is blowing

Likely causes
A refrigerant leak at the flare connections, a failed outdoor fan motor, or an inverter compressor that is not ramping up.
What our technician checks
Flare fittings are leak-tested, outdoor fan and compressor operation are verified, and pressures are read at the service port.

Water dripping from the indoor head

Likely causes
A clogged condensate drain, a head that is not level, or a dirty coil and blower wheel overflowing the drain tray.
What our technician checks
The drain line is flushed, the mounting plate is checked with a level, and the coil and tray are inspected for slime and debris.

Musty smell when running

Likely causes
Mold or biofilm growing on the blower wheel and coil inside the head, often from dirty filters and long runs with high humidity.
What our technician checks
The head covers are removed and the barrel-style blower wheel and coil are inspected for growth that requires a deep cleaning.

Louvers stuck or not swinging

Likely causes
A failed louver stepper motor, a broken louver linkage, or a fault on the indoor control board.
What our technician checks
The stepper motor is tested for continuity and drive signal, and the louver arms are inspected for cracks.

Remote not controlling the unit

Likely causes
Dead remote batteries, a failed infrared receiver on the head, or a display board fault.
What our technician checks
The remote signal is tested, the unit is run from the manual button on the head, and the receiver and display board are checked.
Before you call

Quick checks you can do safely

  • Replace the remote batteries and confirm it is set to cool mode.
  • Remove and rinse the washable filters behind the front panel.
  • Check that the outdoor unit is powered and not buried in snow or debris.
  • Note any blinking light pattern or code on the indoor head.
  • Turn the unit off at the breaker for a few minutes to reset the boards.

Safety first: Inverter boards hold high voltage after shutoff and refrigerant connections must only be opened by an EPA-certified technician.

Still not working?

Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.

(844) 442-1999

Seeing a code? Try our error code lookup or troubleshooting wizard.

How it works

Our 5-step mini-split/ductless AC repair process

  1. Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
  2. DiagnosisThe technician inspects and tests the mini-split/ductless AC to find the actual cause, not just the symptom.
  3. Upfront quoteYou get a clear price before any work starts. No surprise charges.
  4. RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
  5. Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Pricing

Mini-Split/Ductless AC repair cost and lifespan

Typical repair cost$150–$600
Typical service life10–15 yrs

National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.

Parts we replace most often

  • Louver stepper motor
  • Indoor blower wheel
  • Thermistor sensor
  • Inverter control board
  • Outdoor fan motor
  • Condensate pump
  • Remote control

We match every part to your model and serial number.

Maintenance

Keep your Mini-Split/Ductless AC running longer

  • Keep plants and fencing away from the outdoor unit.
  • Rinse the indoor filters every two to four weeks of use.
  • Keep the condensate line clear and confirm the drain outlet is flowing.
  • Check the line set insulation outdoors for cracks or sun damage.
  • Have the blower wheel and coil deep cleaned every year or two.

Build a maintenance plan

Create a printable monthly, quarterly and yearly checklist for every appliance in your home.

Open the schedule generator
Local service

Mini-Split/Ductless AC repair in Aurora, CO

High altitude, dry air and cold winters in Colorado affect how ovens, ranges, dryers and water heaters in Aurora perform.

We provide mini-split/ductless AC repair throughout Aurora, including ZIP codes 80010, 80011, 80012, 80013, 80014 and 80015 and more, and in nearby Commerce City, Englewood and Lone Tree.

Also serving nearby

Brands

Mini-Split/Ductless AC brands we repair

FAQ

Frequently Asked Questions

How much does mini-split/ductless AC repair cost in Aurora, CO?

Most mini-split/ductless AC repairs fall roughly between $150 and $600, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.

Can you repair my mini-split/ductless AC the same day?

Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.

Is the repair guaranteed?

Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.

Which brands do you service?

We work on all major brands, including Carrier, Daikin, Fujitsu, Gree, Mitsubishi and Samsung.

Should I repair or replace my mini-split/ductless AC?

A typical mini-split/ductless AC lasts about 10 to 15 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.

Related

Other air conditioning and cooling repairs

More repair services

Get your mini-split/ductless AC fixed in Aurora

Upfront quote before work starts · Parts matched to your model · 90-day warranty

(844) 442-1999 Book online
Call now Book